AKEMI AKEPOX 5010 Epoxy Adhesive – Stone Bonding & Lamination Resin (A+B)

📊 Technical Specification Table

🧱 AKEMI AKEPOX 5010—High Strength Epoxy for Stone Bonding & Lamination

AKEMI AKEPOX 5010 is a premium quality two-component epoxy adhesive specially formulated for bonding, laminating, fixing, and repairing marble, granite, and natural stones. It is widely used by marble fabricators, granite workshops, stone contractors, and interior installers for heavy-duty bonding applications where high strength and long-term durability are required.

Unlike low-cost polyester adhesives, Akemi Akepox 5010 offers superior adhesion, better chemical resistance, and long-lasting structural bonding. It is designed with a gel-like consistency, which makes it perfect for vertical applications, edge bonding, and slab lamination work without sagging or flowing.

🔍 Why AKEMI AKEPOX 5010 is Better Than Local Adhesives

Most local adhesives fail in stonework because they:

• Lose strength over time

• Shrink and create gaps

• Break under load

• Cannot handle outdoor conditions

AKEMI AKEPOX 5010 solves these problems with:

✔ High bonding strength
✔ Very low shrinkage
✔ Excellent load-bearing capacity
✔ Strong adhesion on polished and unpolished stone
✔ Long life performance

This is why it is trusted by professional marble & granite industries.

🏗️ Main Applications of akemi akepox 5010

✔ Marble Lamination

Used for joining marble slabs to increase thickness or strengthen weak stone.

✔ Granite Joint Bonding

Provides strong bonding for granite joints and edges.

✔ Staircase & Countertop Fixing

Ideal for fixing steps, risers, and kitchen countertops.

✔ Stone Cladding Work

Used for bonding stone panels on walls and elevations.

✔ Repair & Edge Bonding

Used for broken edges and corner repair of stone slabs.

💪 Performance Advantages

✔ High compressive & tensile strength
✔ Excellent adhesion on stone surfaces
✔ Non-sag gel consistency
✔ Resistant to water & chemicals
✔ Suitable for indoor & outdoor use
✔ Long-lasting structural bonding
✔ Professional-grade epoxy system

🔧 Additional Professional & Industrial Usage Insight

AKEMI AKEPOX 5010 is widely used in stone processing units, fabrication workshops, and site installation work where high structural strength is critical. Its gel consistency allows precise placement on vertical joints and edges, which makes it highly suitable for edge lamination, L-shaped kitchen counters, stair nosing bonding, and facade fixing systems.

Because of its low shrinkage and strong chemical resistance, it performs reliably even in temperature fluctuations and moisture-prone environments, which are common in Indian construction conditions. Fabricators prefer AKEPOX 5010 for imported marble and large-format granite slabs, where joint failure can lead to heavy financial loss.

Once cured, the bonded joint can withstand cutting, grinding, polishing, and mechanical load, making it ideal for long-term structural bonding applications. This ensures not only strong adhesion but also consistent finish quality and long-term durability, reducing maintenance issues and call-backs for contractors.

⚙️ Application Method

1. Surface Preparation
   Ensure both surfaces are clean, dry, and dust-free.

2. Mixing
   Mix component A and B in the proper ratio (as per AKEMI instructions).

3. Application
   Apply evenly on both surfaces using a spatula.

4. Joining
   Press surfaces together and hold in position.

5. Curing
   Allow sufficient curing time before polishing or load.

📦 Packaging of akemi akepox 5010

• Supplied in Component A + Component B metal containers

• Available in professional packing sizes

🏪 Available in Jaipur

Royal Trading Co.
Shop No. 8 Sunny Mart, Near PNB Bank, New Aatish Market, Jaipur 302020

❓ FAQ

Q1. What is AKEPOX 5010 used for?
Stone bonding, lamination, and fixing of marble and granite.

Q2. Is it stronger than polyester adhesive?
Yes, epoxy is much stronger and more durable.

Q3. Can it be used for vertical applications?
Yes, it has a gel consistency, which prevents sagging.

Q4. Can it be polished after curing?
Yes, the surface can be finished after full curing.

Q5. Is it suitable for outdoor use?
Yes, it has good resistance to weather and moisture.